FAQs

*Age is a guide only. We recommend sizing based on body measurements for the best fit.

How to Measure

Measure from the base of the palm (where your wrist meets your hand).

Measure up to the tip of the middle finger.

Compare that measurement with the chart above - if you are between sizes, go up a size for comfort.

Fit varies by style and protective gear type, so it’s always best to measure your child and compare to the chart before ordering. 

This sizing applies to 100% riding jerseys, pants and most adult riding apparel.

This chart is the 100% official size guide for women’s casual apparel useful for choosing sizes in tops, hoodies, pants and similar clothing. 

To find the proper glove size, measure the circumference around your dominant hand while holding all of your fingers apart and out stretched.

Do not include your thumb in this measurement and measure lower than all of your knuckles (be careful not to measure too far forward on your pinky finger side as this knuckle is further back).

Remember if your gloves are too loose they will bunch and give you blisters so aim for a tight fit!

Adults:

XS = 21 – 21.5cm
S = 21.5 - 22cm
M = 22 – 22.5cm
L = 22.5 – 23.5cm
XL = 23.5 – 24.5cm
XXL = 24.5 – 25cm
3XL = 25 – 26cm

Check out the entire range of Dirt Bike Gloves at MXstore!

For more detailed information on sizing and how to measure yourself see our Sizing Guide.

Your helmet is the most important piece of safety gear you will wear while riding. Making sure it fits correctly is essential for both comfort and protection.

Helmets are typically sized XS–2XL, with each size covering a small range of head circumferences in centimetres (cm).

Follow these steps:

1. Use a cloth tape measure.

2. Wrap it around your head horizontally.

3. Measure about 1 inch (2–3 cm) above your eyebrows and ears.

4. Record the circumference of your head in centimetres.

Keep in mind that helmet shapes vary between brands, and everyone’s head shape is slightly different.

If possible, try on multiple brands until you find the one that fits your head shape best the better the fit, the safer and more comfortable your ride will be.

Important: This size chart is provided by the manufacturer and should be used as a general guide only. Helmet fit may vary depending on head shape and helmet model.

How to Measure Your Head

1. Use a soft cloth tape measure.

2. Wrap it around your head horizontally, just above your eyebrows and ears.

3. Pull the tape comfortably snug.

4. Record the largest measurement in centimetres (cm) to determine your helmet size

Still in Your Cart?

Made a mistake with your personalised print or changed your mind? No worries! Simply remove the jersey and personalised print from your cart, then start again. To access your cart, click the trolley icon in the top-right corner of our website.

Already Placed Your Order?

Once your order has been placed and payment has been processed, your personalised print order is considered final, and we'll get straight to work creating it.

If you've noticed a mistake, please contact our Customer Service legends as soon as possible. We'll do our best to help, but we can't guarantee changes can be made once your order has been submitted.

Please note that once your jersey has been personalised, we're unable to make changes or accept returns due to spelling errors, incorrect details, user error, or change of mind. Warranty claims are excluded from this policy.

To make our returns process quicker and easier, we handle exchanges a little differently here at MXstore. Instead of a traditional exchange, we offer refunds or store credit. This allows your return to be processed faster and helps get you back on your bike sooner.   

Rather than waiting for your return to arrive and be exchanged, you can:

•  Jump online and order the replacement item immediately
• Secure the stock before it sells out
• Get your new gear on the way sooner

You’ll also receive free shipping on your new order when it meets the minimum order value:

• Australia: Free shipping on orders over $20
• New Zealand: Free shipping on orders over $100

Once your returned item arrives back at MXstore, we will process either your store credit or refund for the original order.

Using Store Credit

• Once your return arrives, we will apply store credit to your MXstore account.
• When you're ready, place a new order online.
• At checkout, ensure you're logged into your account and apply your credit during the payment step.
• Store credit does not expire, so you can use it whenever you're ready.

Receiving a Refund

• Set up your return through our Online Returns Portal.
• If you need a replacement item, you can place a new order straight away to secure the stock.
• Send your original item back to MXstore.
• Once your return arrives, we will process a refund to your original payment method.

Refunds typically take 1–3 business days to appear back in your account after processing.

Have you been checking out some gnarly gear, but all you currently have in your wallet is dust, a piece of gum and an old faded receipt? Not to worry MXstore offers layby payment plans to help you secure the gear you want now and pay it off over time. 

How Layby works? 

To set up a layby, we require a 20% deposit of the total order value upfront. This deposit will Secure your order and Hold the stock for your items. Once the deposit is paid, you can continue making payments until the order is fully paid off.

To keep your layby active, the following terms apply:

• Payments must be made at least every 2 weeks

• Layby duration can be up to 90 days

• MXstore will send weekly reminders and updates on your layby progress

Once your layby is fully paid, we will finalise the order and get your gear on its way so you can get back on the bike and RIDE MORE!

Have you been checking out our awesome website but just can't seem to find what you're looking for? 

When it comes to service, we like to think of everything, which includes being able to special order products in for our customers that we don't currently have in stock! We don't charge any extra for this service and most items can be here, ready to ship from MXstore within three to five business days, providing our supplier has it in stock! How great is that?! 

We order from our suppliers on a daily basis to either top up on our fast movers or to get an item in as per a customers request. If for some reason, our suppliers don't stock the item you were after, our Customer Service team will do their best to point you in the right direction of where you can purchase the product you were chasing. 

If there is a product that you would like for us to order in for you, please get in touch and we will create the order, email you an invoice and once paid, we will have the item on the very next order with our suppliers for you!

Placed an order online but would like to do the return in our Showroom?

Here at MXstore, our online and retail Showroom are both connected to the same warehouse which means that if you placed an order online, you can easily return your order via post or if you are local, you can pop down to our Burleigh Heads Showroom if you wish to do the return with our team in our Showroom. 

Our Showroom Team are here to help make the returns process nice and easy and would be happy to help answer any questions you might have or help you to find the correct size.

Come and say hi to our Team!

Showroom details here

Who wants to wait around when you can have your fresh gear NOW and get straight back on the bike and ride more?

RIDE NOW AND PAY LATER! 

To use Afterpay:

• Add your items to your shopping cart and checkout as normal:
• Select Afterpay as your payment method and follow the prompts:
• Afterpay is available for Australian residents only
• Afterpay is valid for orders between $100 and $800 for first-time users and up to $2,000 for existing Afterpay users. (if your order is under $100 - the Afterpay option will not show at the checkout)
• Afterpay is available online and in our Showroom

Special Orders and Afterpay

Are we ordering an item in for you that is currently not in stock? Jump onto our website and purchase a gift voucher for the total amount of the order, then check out with Afterpay!

Once you receive your voucher code, just give our Customer Service legends a call and they can apply your e-voucher to your special order for you! 

Click the link here for more information about how you can ride more and pay later!

We take the risk out of ordering online! If you receive any items that you are unhappy with for any reason, simply return to us within 60 days in the condition that you received them and we will happily offer a store credit or refund.

We offer instant, online returns for Australian customers!

Quick check first - your return needs to be:

 Unworn, unused, unwashed

-Tags + original packaging still attached

- No marks, scratches, dirt or damage

- Hard parts not fitted & retail packaging in good condition (no tape or labels stuck on it)

If it doesn’t tick these boxes, there’s a good chance it’ll be sent back and no one wants that.

Hot Tip: If your part doesn’t fit your bike, check out Guaranteed Fitment before lodging a return.
If your return does not meet these requirements we may have to refuse the return, and we don’t want that! You can read our full returns terms & conditions below.

If you'd like to start a return, please visit our Return Portal here

Australian Shipping Details

We offer free shipping Australia-wide on all orders over $20. No catches, no fine print, no exclusions just good old-fashioned free freight. We ship everywhere.

We use Australia Post eParcel and StarTrack for most deliveries. Once delivered, parcels are the customer’s responsibility. MXstore is not liable for lost, stolen, damaged or pet-destroyed orders.

Delivery Times

We work hard to get your order out as quickly as possible. Delivery times vary depending on your location. For an estimate, you can use the Australia Post delivery calculator here using Burleigh Heads, 4220 as the dispatch postcode.

Dangerous Goods

Some items, such as oils, lubricants, cleaning products and aerosols, are classified as dangerous goods. These items may be shipped separately from the rest of your order. This doesn’t affect how quickly we dispatch your order, but delivery may take a little longer in some cases.

Sit tight! You’ll still receive full tracking details once your order has been sent.

Dangerous goods cannot be returned or exchanged, and cannot be shipped internationally due to transport regulations.

Check out our International and New Zealand shipping times here

We’re sorry your item(s) have damage!

Some items break during shipment. We’ll do our best to help.

Please report your order issue in our

SUBMIT A REQUEST LINK ADD NEW ONE  for further assistance. Please include an image of the damage.

While we may not be able to guarantee your exact order is replaced due to potential stock issues, we’ll be sure to resolve the situation!

Ahhh, that's not what we like to hear! If we've sent you the wrong item, we're really sorry.

Jump in touch with our Customer Service team and let us know your order number, along with a couple of photos of the item you received (including any labels if you can). We'll get onto it straight away and sort things out as quickly as possible.

Hang onto the item for now and don't use it, as we'll usually need it returned before we send the correct one.

We'll make it as quick and painless as possible to get the right gear on its way!

Need to cancel your order? Get in touch with our Customer Service team as soon as possible.

If your order hasn't been picked and packed yet, we'll do our best to cancel it for you.

If your order has already been dispatched, we won't be able to cancel it. Once it arrives, you can lodge a return through our Returns Portal if it's eligible under our Returns Policy here.

The sooner you contact us, the better the chance we can stop your order before it leaves our warehouse.

Shipping costs depend on the size of your order, where it's being sent, and the shipping method you choose at checkout.

You'll see all available shipping options and the exact cost before you complete your order, so there are no surprises.

We also offer FREE standard shipping on eligible orders over our free shipping threshold. If your order qualifies, it'll be automatically applied at checkout.

For full details on shipping options, delivery timeframes and free shipping, check out our Shipping Information page.

Because our warehouse works fast to get your gear out the door, we're generally unable to make changes or add items once an order has been placed.

If you've made a mistake or need to update your delivery address, contact our Customer Service team as soon as possible. If your order hasn't started processing, we'll do our best to help - but we can't guarantee we'll be able to make changes.

Need another item? The quickest option is usually to place a new order so there's no delay to getting your gear.

We don't offer traditional exchanges, but we've got a quicker way to get you back on the bike.

If you'd like a different size or item, simply place a new order straight away to secure the stock, then return your original item through our Returns Portal. Once we receive your return, we'll process your refund or store credit. This means you don't have to wait for your return to be processed before getting your replacement on the way.

To be eligible for a refund or store credit, your item must be:

• Unused, unworn and unwashed.
• In its original packaging with all tags attached.
• Returned within 60 days of purchase.

Some products, including personalised items, underwear and dangerous goods aren't eligible for return.

How do I track my order?

As soon as your order leaves our warehouse, we'll send you a shipping confirmation email with your tracking details.

You can use the tracking link in that email to follow your parcel's journey right to your door.

If you created an MXstore account before placing your order, you can also log in and view your order history and tracking information anytime.

Haven't received your tracking email or your tracking hasn't updated? Get in touch with our Customer Service team and we'll be happy to help.

Need to send something back? No worries!

Simply head to our Online Returns Portal, enter your order number and the email address used to place your order, then follow the prompts to lodge your return. You'll be able to choose whether you'd like a refund or store credit (if your return is eligible).

Before you get started, make sure your item is:

• Within 60 days of purchase.
• Brand new, unworn, unused and unwashed.
• Returned with all original tags and packaging.
• Not an excluded item such as dangerous goods, underwear or swimwear.

Once your return has been lodged, simply package your item securely, attach your return label and drop it off with Australia Post. We'll process your refund or store credit as soon as your return has been received and inspected.

If you're having trouble logging into your MXstore account, don't stress!

First, make sure you're using the same email address you used to create your account. If you've forgotten your password, click Forgot Password on the login page and we'll send you a link to reset it.

If you originally signed in with your Google account, you'll need to continue using Sign in with Google rather than entering your email and password manually.

Still can't log in? It's possible you checked out as a guest or your account was created using a different email address.

If you're still stuck, get in touch with our Customer Service team and we'll help get you back into your account in no time.

We are always on the look out for epic humans to join our team! Check out the current opportunities here. 

Dropship items are shipped directly from our suppliers rather than from our warehouse.
If your order contains both stocked items and dropship items, these items will be shipped separately. You may therefore receive multiple parcels and tracking numbers for the same order.

Wheel Set Lead Times
Wheel sets are custom-built to suit your specific bike, so they generally take 1–2 weeks to be built and shipped from the supplier.
Please allow for this additional processing time when placing your order.

What if a Wheel Set Component is Out of Stock?
If a component required to build your wheel set is out of stock, a member of our team will contact you to:

• Advise you of the stock issue
• Provide an updated estimated timeframe
• Discuss alternative in-stock options where available

Custom Wheel Set Orders
Please note: Once your order is placed, your wheel set will be custom-made according to the specifications you provided. We are unable to make adjustments or alterations to the specifications after your purchase has been confirmed.
For this reason, please carefully check your bike model, year and selected specifications before completing your order.

Need Help Before Ordering?
If you have any questions or need assistance before finalising your order, our friendly Customer Service team is happy to help.
Call us on 07 5535 7998 before placing your order and we'll be happy to assist.

How does Jersey Print work?

Getting a professionally printed jersey has never been easier! Simply choose your jersey, add a personalised print, and we'll take care of the rest, all in one order.

Once your order is placed, our team picks your jersey and sends it to our in-house Jersey Print team. Your design is created, printed and heat-pressed using high-quality materials before being quality checked and sent on its way.

Order before 2pm (QLD business days) and we'll aim to dispatch your personalised jersey the same day. Depending on your location, you could even have it delivered the next day.

How it works

1. Order
Choose your jersey, add your personalised print and place your order.

2. Print
Our in-house team creates, prints and checks your design before applying it to your jersey.

3. Press
Your print is professionally heat-pressed for a durable, long-lasting finish.

4. Dispatch
After a final quality check, your jersey is packed with the rest of your order and shipped.

MXstore reserves the right to refuse any returned item without notice if we deem the return to not meet guidelines set upon creation of the return and in line with our Return Terms and Conditions.

Store Credit

Once you receive the confirmation email for your return, you can use your store credit straight away. 

• Your credit can be used online, over the phone or in our Burleigh Heads Showroom!
• To use your store credit, simply log into your MXstore account online before proceeding to the checkout. 
• Upon checkout, your credit will be available to add to the order under 'Payment Options' at the payment section of the process. Be sure to apply the credit before making payment for the remainder of the order. 
• Unfortunately Afterpay does not allow split payments, this means you won't be able to use Afterpay in conjunction with a store credit. 

Refunds

Refunds are processed every day between business hours from Monday - Friday. 

Please allow 1-3 business days for the funds to land back into your account, depending on what bank you were with.

All refunds are processed back through to the original payment method used for the order.

If you believe your item is faulty, our Customer Service Team is here to help.

Step 1: Contact our team with:

• Photos of the fault (where possible), or
• A description of the issue if it can't be photographed.

We'll review the information and advise on the next steps.

Step 2: Return Your Item 

If required, we'll ask you to return the item to MXstore. Once received, it will be sent to the manufacturer or supplier for assessment.

Step 3: Assessment 

The manufacturer or supplier will determine whether your item will be repaired, replaced, or if the claim is not covered under warranty. We'll keep you updated throughout the process.

Return Postage 

Approved warranty claims: MXstore covers the return postage.

Unsuccessful claims: Return postage costs are the customer's responsibility.

Battery Warranty Claims

Customers are responsible for the cost of returning batteries for assessment. If the battery is found to be faulty, we'll reimburse the return postage.

Processing Times

Assessment times vary depending on the manufacturer or supplier. We'll keep you informed and work to resolve your claim as quickly as possible.

Ready to Start?

Contact our Customer Service Team and we'll guide you through the warranty process.

To make sure all of our customers have an epic experience with MXstore, we must ensure all of our products sold to our customers are in new condition with packaging & original tags.

 All returns must meet our terms & conditions, including: 

• All items are in brand new condition (unworn, unused, unwashed) including packaging & tags.
• Dirt bike hard parts have not been fitted and are not scratched, marked or dirty.
• All goods are re-packaged as you received them (e.g. helmets inside helmet bag).
• No tape was applied or damage was caused to retail packaging & boxes.

For an item to be new, the product must not be worn or used and all of the packaging and tags are still in their brand new, original condition. 

The AusPost app makes it easy and safe to manage your deliveries. Download today using your smartphone, tablet, or smartwatch.

Click HERE to check out the Auspost website for more information about the app and exclusive insights into your deliveries!

Please be aware that a signature on delivery is no longer required throughout Australia

Don't panic just yet! Sometimes carriers scan parcels as delivered a little early, and they can still turn up later that day.

First, we recommend:

• Checking around your property and any safe places.
• Asking anyone in your household if they've accepted the delivery.
• Checking with your neighbours in case it was left there by mistake.

Still no luck? Get in touch with our Customer Service team and we'll help track it down with the carrier. We'll work with you to get it sorted as quickly as possible.

Need to remove a bike from My Garage? Just follow these quick steps:

1. Open My Garage by clicking the My Garage Parts Finder from any page.
2. Select the bike you'd like to remove.
3. Click Remove Bike from My Garage.
4. Confirm by selecting Delete Permanently.
5. That's it! Your bike has now been removed from My Garage

To save bikes to My Garage, you'll first need to be logged in to your MXstore account. Don't have one yet? Creating an account is quick and free.

Save Your Bike from the Website

1. Search for your bike using the My Garage Parts Finder.
2. Select either Save to My Garage option.
3. Your bike is now saved to your account!

Save Your Bike from My Garage

1. Open My Garage from the My Garage Parts Finder.
2. Select your bike's Make, Model, and Year from the drop-down menus.
3. Click Add Bike.
4. Your bike is now saved and ready to use.

Once you've saved your bike to My Garage, you can make it your own by adding a custom photo and nickname.

Add a Custom Photo

1. Open My Garage and select Personalise.
2. Click Add Photo on your bike's profile.
3. Choose a photo from your device and select Open.
4. Your custom photo will be saved to your bike.

Want to change it later? Simply repeat the steps above and upload a new photo.

Add a Nickname

1. Open My Garage and select Personalise.
2. Click Edit Nickname on your bike's profile.
3. Enter your preferred nickname and press Enter.
4. Your bike is now personalised with its own photo and nickname.

Own more than one bike? No worries! My Garage lets you save up to 30 bikes to your account.

Add a Bike from My Garage

1. Open My Garage.
2. Select your bike's Make, Model, and Year using the drop-down menus.
3. Click Add Bike.
4. Your bike is now saved! Repeat these steps to add more bikes.

Add a Bike from the My Garage Parts Finder

1. Open the My Garage Parts Finder from any page.
2. Click Select New Bike.
3. Choose your bike's Make, Model, and Year, then click Search.
4. Select Save to add it to your My Garage.

You can save up to 30 bikes, making it easy to switch between rides and find the right parts every time.

Just received your new MXstore Graphics Kit? Follow the steps below to get the best fit and longest life from your graphics.

Before You Start

• Check that each graphic matches the correct plastic before removing the backing paper.
• Lay the graphics over your plastics first to confirm the shape and fit.

Remove Old Graphics

• Warm the existing graphics with a hairdryer or heat gun on a low to medium setting.
• Slowly peel them away at a 90° angle.
• Remove any leftover adhesive using isopropyl alcohol or mineral turpentine.

Prepare the Surface

For the best results, clean the plastics thoroughly using:

• Isopropyl alcohol
• Vinyl prep
• Brake or contact cleaner

Make sure the surface is completely clean, dry, and free of dirt, oil, dust, and adhesive residue before applying your new graphics.

Apply Your Graphics

• Position each graphic carefully before pressing it down.
• If needed, use a small amount of heat from a hairdryer or heat gun to help the graphic conform to curves.
• Avoid overheating the material.

After Installation

• Check your graphics the following day for any edges that may have lifted.
• If needed, apply gentle heat and firmly press the edges back down.
• We recommend waiting 72 hours before riding to allow the adhesive to fully bond.

Important Information

Incorrect installation is not covered under warranty. If you notice any issues with the quality of your graphics kit, please contact us before fitting or riding.

Keep in mind that dirt bikes are built to be ridden, so normal wear and tear to your graphics over time is expected.

Do you know how often to replace the drive chain of your dirt bike? Read on to discover the secrets and learn how to get the maximum life out of your chain and sprockets.

There are predominantly 3 sizes of chains for all dirt bikes no matter what age or size the bike is. A ‘520’ chain will fit most full sized dirt bikes on the market. From a 125 through to a big bore KTM 525 they all predominantly share this size. Smaller bikes such as 85cc MX bikes will run a ‘428’ and only 50cc MX bikes will go as low as a ‘420’.

We recommend always replacing your sprockets at the same time as replacing your chain as a new chain on worn sprockets will shorten the lifespan of the chain. The first step to installing a new chain is to adjust your rear wheel chain tensioning blocks as far in as possible. This will allow plenty of room to tension your chain as it wears and stretched, just leave the axel loose while you are working out the chain length as it will help working it out. Unravel the chain and roll it out around the sprockets on the bike as you would apply any chain which is cut to length. Once you have the chain unraveled you will notice an overlap where the chain is to join.

We want to make mention of the single most important part of any set of handlebars which is the bar pad, these are either the square pad for taper bars or the round bar pad for the 7/8” bars. Over the years we have personally seen what can happen to a jaw, face and your teeth when bare metal comes in contact with your head so save yourself a lot of pain and medical costs and always run a bar pad! All decent handlebars are sold with a free bar pad so there are no excuses!

Dirt Bike Grips on all dirt bikes with a twister throttle apart from 50cc kids bikes like the Yamaha PW50, Honda QR50, Honda CRF50 for example will all take the one size hand grips, quad bikes with a thumb throttle may require a different set of grips due to the fact they don’t have a twister throttle.

There are two sizes of handlebars which pretty much cover every dirt bike since the beginning of time:

• 7/8”: AKA two piece bars, 22.2mm bars, bars with a cross brace. This size was traditionally the standard for all motocross bikes as the technology for tapered bars was not around until the mid to late 90’s and when it was introduced they were quite expensive.
• Fat bars: AKA tapered bars, 28mm bars, 1 1/8”, oversized bars. Are the newer technology featuring a handlebar without a cross brace to allow for some flex and more rider comfort, but to increase the strength the bars taper up to be thicker at the clamping point.
• Twin walls: Just to make it tricky a third style of bar was introduced being a twin wall handlebar, the simplest way to describe these are a fat bar with a cross brace which are still 1 1/8” at the clamping point.

The crossbar was there for added strength of the handlebars but as technology became better the opinion was the crossbar made for a very rigid feel and the rider would fatigue quicker.

Basically there are just two types of handlebars, the 7/8" bars (identified by their cross brace across the middle of the bars) and 1 1/8" bars also called fatbars or tapered bars (a fatter bar through the length of the bar with no cross brace across the middle).

Either bars can be fitted to your bike, the only issue is the mounts that the bars sit in as each type of bar has a different thickness at this point.

If you have 7/8" bars on your bike right now the mounts you have will fit this type/thickness of bar. If you want 1 1/8" (fat or tapered bars) you will need to purchase a bar mount that converts the mount you have to suit or replace the mounts you have to suit your new bars. The same rules apply if you have 1 1/18" bars and want to fit 7/8" bars to the bike.

The only exception to this rule is the Twin Wall bar which is a fat bar with a cross brace which is designed to offer premium strength.

Handlebar Width:

For any dirt bike 125cc and above the standard handlebar width is approximately 800mm, if a set of bars has the word Mini in the title, it has been designed to fit 65cc, 85cc, 100cc and 150cc 4 strokes (mini race bikes). These have an overall bar width of around 775mm.

Some handlebars come with markings on the ends to allow riders to trim some width off the ends of the handlebars to suit different riding styles.

Providing you have the matching bar clamp sizing you can put wide bars on a mini bike and also mini bars on a full sized bike if you are desperate to go for a ride and can't find the bars you would normally run. Just bear in mind the geometry and ergonomics of the bike will be slightly off and may feel awkward for the rider.

Check out Dirt Bike Handlebars and Handlebar Clamps here at MXstore.

There are a number of styles of bar clamps available on the market to suit a number of different applications depending on your needs.

If you are changing size of handlebars you will need some form of adaptor clamp to accommodate the different size, you can either purchase adaptor clamps which bolt into your existing bar clamps but this will also raise your bar height. Different makes and models of bikes have slightly different spacing for the bolts so we recommend checking what your bikes dimensions are before making a purchase.

Another option is the bolt through clamp which replaces the entire bar clamp, first you have to remove the original clamps from the top triple clamp and replace them with the new product. The benefit of this being you can choose weather you want the bar height raised or not as they come in a variety of sizes, they also look neater on the bike but again when purchasing check the fitment as some of the triple clamp bolts are thicker than others so not every clamp will fit every bike!

One part of your bike which can make or break the overall ergonomics and feel of the machine, even where you position your bars will affect how the bike feels. Although you will eventually get used to whatever setup you have, riding will be a lot easier when you choose set of bars which are suitable for your height and the style of riding you are doing!

There are a number of different contributing factors which will give you the right bar height and angle you are looking for, the first thing you can do is check the pitch the bars are set to. Whether your bike is new or second-hand chances are that you could feel more comfortable rolling the bars either forward or back in the bar mounts.

An easy way to establish a starting point is to first set the bars in a neutral position, to do this simply align point “C” (rise) up to be the same angle as the bikes front forks. This will give you a nice balance of steering comfort and also overall bar height and is known as the neutral bar position.

The Sweep “E” and also the height “B” also contributes to the overall height of your bars as they are set to an angle rolling the bars forward and back will turn the ends of the bars up or down slightly.

If you are a taller rider you may want more room and bar height so running them slightly forward from the neutral position may feel better and if you are shorter it may be more comfortable to roll them back to lower the bar height and increase the sweep so the controls are closer to the rider.

Every single motorbike which has ever been created has a set of Dirt Bike Handlebars, the modern day Japanese and European dirt bike has only ever had 2 sizing options to choose from yet somehow we are asked countless times every single day which handlebars will suit their bike.

The more questions we have answered over time we realised that although the fundamentals of handlebar fitment are very basic there are many different options available for handlebars, clamps and accessories to consider when setting your bike up to make it feel just right for your riding style.

Check out all of the top brands of Dirt Bike Handlebars at MXstore:

• Pro Taper Handlebars
• Renthal Handlebars
• RHK Handlebars

If you have any questions regarding handlebars, clamps or any fitment questions please don’t hesitate to contact the friendly team at MXstore